| Quick facts | Answer |
|---|---|
| Cost range | $2,500-$3,800 basic; $3,800-$5,200 mid-tier installed |
| Time | Permit plan review goal is 3 working days |
| Who's qualified | Arizona A-9 Swimming Pools licensed contractor |
Gilbert, AZ: what's different here
Gilbert sits in Maricopa County, about 12 miles and roughly 15 minutes by car from Tempe. Much of the town's housing came from the late-1990s and 2000s building boom, so many homes were built after 2000. Gilbert also sits on former agricultural land with expansive clay soils that shift with moisture, which matters for pool equipment pads. Summer monsoon storms bring the heaviest rain, so lot grading and drainage away from the slab and equipment pad are important.
Does pool automation controller setup in Gilbert need a permit?
Gilbert requires a permit for swimming pool and spa projects, submitted through its One Stop Shop portal. The permit package needs a scaled site plan, structural plans, a barrier plan, and an electrical plan covering bonding and the equipment disconnect. Residential pool plan review has a goal of 3 working days.
Who can legally do pool automation controller setup in Gilbert?
Arizona requires a licensed contractor for work valued at $1,000 or more, or any work requiring a permit. The state's A-9 Swimming Pools classification covers pool service and repair, including related wiring and equipment. Ask the pro for proof of license and insurance before work starts.
What is included in the $2,500 to $5,200 price range?
The basic tier, $2,500 to $3,800 installed, covers a controller plus pool/spa actuators and LED light integration. The mid-tier, $3,800 to $5,200, adds heater integration and two water-feature zones. Get itemized quotes so you know which features each price includes.
How far is Gilbert from Tempe for pool service?
Gilbert is about 12 miles from Tempe, roughly a 15-minute drive via the main highway. A local pro can reach Gilbert addresses quickly for automation setup and follow-up service. Tempe Pool Guy refers licensed, insured pros who work the East Valley.
What to do next
- Decide which tier you need: basic controller with actuators and LED integration ($2,500-$3,800) or mid-tier with heater and two water-feature zones ($3,800-$5,200).
- Ask the pro to verify their Arizona contractor license in the A-9 Swimming Pools classification on the Arizona Registrar of Contractors license classifications list.
- Confirm the quote includes the electrical plan for bonding and the equipment disconnect required for Gilbert's One Stop Shop permit.
- Check that the equipment pad location follows Gilbert's drainage guidance, since monsoon rain makes grading away from the slab important.
- Call (928) 396-1068 or email [email protected] for a free quote from a licensed, insured pool service professional.
Tempe Pool Guy is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.
