| Quick facts | Answer |
|---|---|
| Cost range | $3,500-$10,000 depending on finish and repairs needed |
| Time | About 8 hours of labor for a 200-215 sq ft pool |
| Who's qualified | Arizona R-36 or C-36 plastering license; C-6 pool service cannot replace plaster |
Mesa, AZ: what's different here
Mesa sits in Maricopa County, about 6 miles and roughly 9 minutes by car from Tempe via the main highway. The city has a hot desert climate, with extreme summer temperatures and high evaporation that drive up pool service demand. Local resurfacing examples describe in-ground pools of 14x28 to 16x32 feet holding 10,000 to 20,000 gallons. That mix of heat and pool stock makes plaster wear a common issue for Mesa owners.
Does pool plaster repair in Mesa require a licensed contractor?
Yes, in most cases. Arizona ROC guidance says a contractor license is generally required when labor and materials exceed $1,000, or when a permit is needed regardless of price. Since a full replaster in Mesa runs into the thousands of dollars, the job falls well past that threshold.
Which Arizona license covers pool plaster repair?
Arizona's R-36 and C-36 plastering classifications cover plastering work. The C-6 swimming pool service and repair classification allows only minor repair of residential pools - it does not allow complete replacement of plaster or pebble pool interiors and decks. Arizona's A-9 Swimming Pools classification covers constructing, servicing, and repairing pools and spas.
How long does a Mesa pool replaster take?
One local cost breakdown shows about 8.2 hours of labor for a 215 square foot pool, and another Mesa resurfacing estimate lists 8 hours for a 200 square foot job. Typical Mesa in-ground pools run 14x28 to 16x32 feet, 3.5-5 feet deep, holding 10,000 to 20,000 gallons.
What does each pool plaster repair finish cost in Mesa?
A white plaster finish runs around $5,000-$7,000 depending on pool size and repairs needed before plastering. Pebble or quartz aggregate finishes cost about $3,500-$8,500 for a rough finish and $5,000-$10,000 for a polished finish.
What to do next
- Measure your pool's square footage - typical Mesa pools run 14x28 to 16x32 feet - so quotes cover the same scope.
- Ask each quote to itemize repairs needed before plastering, since those affect the $5,000-$7,000 white plaster range.
- Verify the contractor's license class on the Arizona Registrar of Contractors license classifications list - plastering needs R-36 or C-36, not C-6.
- Price white plaster against pebble or quartz aggregate ($3,500-$8,500 rough, $5,000-$10,000 polished) before choosing a finish.
- Call (928) 396-1068 or email [email protected] for a free quote from a licensed, insured pool service professional.
Tempe Pool Guy is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.
